Sharp ux-310 user manual

At any other time, press this key to select the reception mode an arrow in the display will point to the currently selected reception mode. Use these keys to dial numbers, and enter numbers and letters when storing auto-dial numbers. When a document is in the feeder, press this key to make a copy of a document.

At any other time, press this key to print out the Help List, a quick reference guide to the operation of your fax machine. Press this key after dialing to begin fax transmission. Press this key before dialing to send a fax through memory. Press this key followed by the arrow keys to select special functions and settings.

Press this key to register for OpenLCR service and receive rate information to your fax. Volume setting: When a document is not in the feeder, press these keys to change the handset volume when the handset is lifted, the speaker volume when the SPEAKER key has been pressed, or the ringer volume at any other time. Press this key to listen to the line and fax tones through the speaker when faxing a document. Note: This is not a speakerphone.

You must pick up the handset to talk with the other party. If the machine is moved from a cold to a warm place, it is possible that condensation may form on the scanning glass, preventing proper scanning of documents for transmission. To remove the condensation, turn on the power and wait approximately two hours before using the machine. Make sure the handset cord goes into the jack marked with a handset symbol on the side of the machine!

Use the handset to make ordinary phone calls, or to transmit and receive faxes manually. Do not plug the power cord into any other kind of outlet. This will damage the machine and is not covered under the warranty. Insert one end of the line cord into the jack on the back of the machine marked TEL.

Insert the other end into a standard RJ11C single-line wall telephone jack. The fax machine is set for tone dialing. If you are on a pulse dial line, you must set the fax machine for pulse dialing.

Press the keys on the operation panel as follows:. If you attempt to use the fax machine in conjunction with any of these services, you may experience errors during transmission and reception of facsimile messages. Surge protectors can be purchased at most telephone specialty stores. Note: The paper tray extension has a top side and a bottom side. If you cannot insert the tabs into the holes, turn the support over. Your fax uses a roll of imaging film to create printed text and images.

The print head in the fax applies heat to the imaging film to transfer ink to the paper. Follow the steps below to load or replace the film. Thick roll to rear. You can load letter or legal size paper in the paper tray. The maximum number of sheets is as follows:. Letter size: 50 sheets lb. Printing on the reverse side may result in poor print quality.

Note: Do not use paper that has already been printed on, or paper that is curled. Note: If at any time the display shows the alternating messages at right, check the printing paper.

If the tray is empty, add paper. If there is paper in the tray, take it out and then reinsert it. The fax has been set at the factory to scale received faxes to letter size paper.

Your fax has been set at the factory to print at normal contrast. Before you can begin sending faxes, you must enter your name and fax telephone number. You also need to set the date and time. Once you enter this information, it will automatically appear at the top of each fax page you send. Enter your name and fax number here and set the date and time as explained in the following section to have the fax machine include this information automatically at the top of your fax messages.

Up to 24 characters can be entered. To enter one of the following symbols, press. The date and time appear in the display and are printed at the top of every page you fax. Set the date and time as shown below. To ensure accurate use of the rate data, do not change the date and time setting yourself. If desired, you can set the clock to move forward and backward automatically at the beginning and end of Daylight Saving Time.

Follow these steps:. Select this mode when you only want to receive faxes on your line. The fax machine will automatically answer all calls on four rings and receive incoming faxes. Select this mode when you want to receive both phone calls and faxes on the line connected to the fax machine.

All calls, including faxes, must be answered by picking up the fax machine's handset or an extension phone connected to the same line. Make sure a document is not loaded in the document feeder , and then. You can adjust the volume of the speaker, handset, and ringer using the up and down arrow keys. Your fax machine features OpenLCR technology, which helps you save money on long distance and international phone calls both fax and voice by automatically routing each call for the best available rate.

The only cost to you is that of a periodic call usually once every three months to OpenLCR to receive the latest rate data. The plate spring [1] General description presses the document to the paper feed roller to assure smooth feed- ing of the document. For the assembly procedures, reverse the disassembly procedures.

For disassembly and assembly of such parts and units, refer to the Parts List. Speaker cable pass to the cable core 2 times. Page Chapter 4. Page Chapter 5. If the 1. Type Type Note: Active low signals have an "n" pin name ending.

Hysteresis In, Internal Pullup. Line connecting relay and DP generating relay 3. Block diagram 1. Page Chapter 6. Page Chapter 7. COPY key? STOP key? Memory clear Memory clear Page Chapter 8. Description Relay board unit 1. Shading paper The white and black basis is applied to remember the shading wave- form.

Be sure to perform this operation when replacing the battery or replacing the control PWB. Execute in the shading mode of DIAG mode. Print page 1 Print document 81 pages. Rename the bookmark. Delete bookmark? Cancel Delete. Delete from my manuals? Product Information. Select a date. Where can I find my model number? All Sharp products have a model number stated on them, some in more than one place. The model number can be found on the original box the item was purchased in, on the product manual, and on the product in the locations described below.

Helpful tip: For convenience, if you have a digital camera or smart phone, you may want to take a digital photo of the model number. TV On the back of the TV on a sticker that shows a bar code and serial number. Audio Systems. Sound Bars.

PCI Air Purifiers. Where can I find my serial number? All Sharp products have a serial number stated on them, some in more than one place. The serial number can be found on the original box the item was purchased in, on the product manual, and on the product in the locations described below. Service Request. Contact Information. Address Address 1 is Required.